Services Hotline : (91) 9840745811
 
Singapore  |   Indonesia  |   India  |   Myanmar  |   Kazakhstan  |   Malaysia  |   Thailand  |   Vietnam  |   China
   
 
 

Range of Products

 
Electric Hoists
Manual Hoists & Winches
Explosion-Proof Hoists
Standard Crane
Goods Hoists
VCTS Open Winch
Stagemaker
 

Accessories & Parts

 
Control Systems
Electrification
Drive Wheel & End Carriages
Under the Hook Device
 

Press Release

  Jenmon Newsletter 2009
  Business Time May 21 2009
Press Release July 2008
  Press Release March 2008
  Press Release October 2007
  Press Release August 2007
  Press Release June 2007
 
 
 

Industrial - Explosion-Proof Hoists

 
Designed with a close awareness of our customers' requirements and usages in a diverse industry (F&B, chemical, petrol & gas, etc.) where safety is a crucial factor, this new range of lifting unit is manufactured according to the new ATEX 100a (94/09/CE applicable in 2003) and CE regulations (CE marking, Documentation, CE certificate approval).
 
Symbols
Material is available in Explosion-Proof version
Material is available in Spark-Proof version
 
 

 Eurobloc VT EX

 

Loads from 800 kg to 100,000 kg

Main Characteristics :

  • Explosion protection according to EEX de IIB T4 degree (EN/DIN) as standard
  • Two-speed pole change hoisting motors with thermistors
  • Two-speed pole change trolley motors (for hoists with trolley)
  • Hoist upper and lower limit switches operated by rope guide
  • Electro-mechanical overload protector
  • Hoist electrics with main contactor and 48 V contractor control
  • Motor protection IP66 according to EN 60 529
  • Push button box with an emergency «stop» button
  • Ergonomically Hook with safety latch
  • Galvanized wire rope
  • Operation hours meter
 
Options :
  • Protection EEx de IIC T4 (Instead of IIB)
  • Ramshorm hook
  • Non-rotating hook
  • Remote control systems
  • Travelling limit switch
  • Special rail gauge for crab trolley
  • Non-standard rail width for monorail trolley
  • Spark proof Protection:
    1. Bronze travelling wheels
    2. Bronze roller anti-rail jump, non-ferrous metal plated
    3. Bronzed hook
 
 Download Brochure Back to top
 
 

 Eurochain VL EX

 

Loads from 160 to 5,000 kg

Main Characteristics :

  • Hook suspended model or with push, chain driven or electric trolley
  • Explosion protection according to EEx de IIB T4 degree (EN/DIN) as standard
  • Standard height of lift 3 m
  • 1 or 2 speeds hoisting motor
  • 1 or 2 speeds trolley motor
  • IP55 protected motors, with thermistors
  • Galvanized load chain
  • Stainless steel hand chain for chain travel trolley
  • Pendant push button box + control cable of 2.5 m of length
  • 2 buttons pendant for hook suspended hoist on manual trolley
  • 4 buttons pendant for hoist attached to electric trolley
  • Power supply 400 V/3Ph /50 Hz or 415V/ 3Ph/ 50Hz
  • Low voltage control 48 V
  • Torque limiter
  • Chain collector
  • Emergency stop button with main contactor
  • Epoxy Paint 5 years guaranteed
 
Options :
  • EEx de IIC T4 protection (instead of IIB)
  • Lifting Upper and lower limit switch
  • Travel limit switch
  • Special trolley speed
  • Monorail bogey trolley
  • Monorail short headroom trolley
  • Keylock on push button box
  • Time meter
  • Special supply voltage
  • Remote control
  • Non-standard IP protection degree
  • Special paint
  • Stainless steel load chain
  • Spark proof Protection:
    1. Bronze travelling wheels
    2. Bronze roller anti-rail jump, non-ferrous metal plated
    3. Bronzed hook
    4. Bronze-made load and return wheels
 
 Download Brochure Back to top
 
 

 Eurolift BH EX

 

Loads from 500 to 2,000 kg

This hoist is also available for explosive, dust-laden atmospheres bearing the label ATEX Ex II 2/3 D IP65 T+135°C.

In the ATEX version, the EUROLIFT BH belt hoist complies with European Directive 94/09/EC, approved by the INERIS.

We offer a standard ATEX version of EUROLIFT BH belt-actuated electric hoist specifically designed for the most stringent applications with regards to hygiene and safety (agricultural foodstuffs, white rooms, the chemical and petrochemical industry etc).

VERLINDE TECHNOLOGIES is the only manufacturer of hoisting equipments to design and produce explosion-proof electric motors. These new ATEX versions are thus under overall control.

 
Main Features :
  • ATEX marking: Ex II 2 G c EEx de IIB/IIC T4
  • Explosion protection according to EEx de IIB T4 degree (EN/DIN) as standard
  • Hoisting capacity 500 kg to 6.5 metric tons
  • Anticorrosion product with high strength rot-proof belt also available in stainless steel version
  • 2-speed hoisting motor with temperature sensors,  EEx d or IIB or IIC T4, IP65
  • Type EEx de IIB or IIC T6 pushbutton box with emergency stop 
  • High security belt guide, top and bottom limit switches and load electromagnetic limiting device as standard equipment
  • ATEX EEx de IIB or IIC gland and electric cabinet
 
Main Characteristics :
  • Suspended model or with push, chain driven or electric trolley
  • Explosion protection according to EEx de IIB T4
  • 2 mechanical variable speed hoisting motors with temperature probes
  • Anti-static polyester lifting belt
  • Motor protection IP 55
  • Hook with safety latch
  • High resistance polyester belt (good resistance to acids, no action from solvents, rot-proof, antistatic)
  • Electrically isolated hook block
  • Pendant push button box + control cable 2.5 m of length
  • 4 buttons pendant for hook suspended hoist on manual trolley
  • 6 buttons pendant for hoist attached to electric trolley
  • Emergency stop button with main contactor
  • Power supply 400 V / 3ph / 50 Hz
  • Overload limiter
  • Upper and lower limit switch
  • Electric cubicle with cable gland and low voltage 48 V contactor control
  • For hoist with trolley, Two travelling speed with motor (20 & 5 m/min or 10 & 2.5 m/min)
  • Epoxy Paint 5 years guaranteed
 
Options :
  • EEx de IIC T4 protection (instead of IIB)
  • Special voltage or frequency
  • Monorail bogey trolley for curve beam
  • Travelling limit switch
  • Spark proof Protection:
    1. Bronze travelling wheels
    2. Bronze roller anti-rail jump, non-ferrous metal plated
    3. Bronzed hook
 
 Download Brochure Back to top
 
 

 PHD-PHR

 
Loads from 250 to 10,000 kg
 
Spark proof manual travelling trolley
Main Characteristics :
  • Loads up to 10 tons
  • Travelling trolley operated manually
  • Bronze wheels and derailment catchment
  • Rubber buffer
  • Corrosion-proof version available upon request
 
 Download Brochure Back to top
 
 

 CHD-CHR

 
Loads from 250 to 10,000 kg
 
Spark proof manual hand chain block
Main Characteristics :
  • Loads up to 20 tons
  • Bronze coated hooks and bronze wheels in trolleys
  • Bronze load sprocket, return pulleys, brake pinion and chain guide
  • Corrosion proof version available upon request
 
  Back to top
 
 

 PHD-PHR SP/UP

 

Manual top running or suspended crane kit with spark proofing features

Main Characteristics :

  • Set of components for manufacturing manual top running or underslung cranes with spark proofing features
  • Girder or crane manufacturing drawings
  • Support brackets for long travel  drive mechanism (standard drawing supplied)
  • Capacity from 500 kg up to 10 tons
  • Span from 4 up to 16 m
 
 
  Back to top
 
 

 Eurostyle EX

 

Wall or column mounted jib cranes

Main Characteristics :

  • Explosion proof and spark proof jib cranes
  • Mounted on a wall or on a column, with total or partial rotation capability, manual or motorized
  • Individual handling is essential to each workstation to prevent a slowdown in the production rhythm when using the traveling crane in service at the production plant
 
 Download Brochure Back to top
 
 
 

 Composant + EX

 
Top running end carriage for crane
Main Characteristics :
  • Explosion proof protection degree EEx de IIB T4
  • End carriages with buffers and wheels
  • Motor gear with 2 travelling speeds
  • Travelling motor(s) with brake(s), IP 55 protection, class F
  • End carriages with top girder connection Motors thermal protection
 
Options :
  • Special voltage
  • Travel limit switch
  • Tropicalized motors
  • Spark proofing features
  • Non standard wheel groove
 
 
Underslung end carriage for crane
Main Characteristics :
  • Explosion protection degree: EEx de IIB T4
  • End carriages supplied with channels and adjustable trolleys
  • 2 travelling speeds
  • 2 geared wheels per carriage
  • Drive units with brake
  • Motor protection IP 55, insulation class F
  • Motors thermal protection

Options:

  • Special voltage
  • Travel limit switch
  • Tropicalized motors
  • Spark proofing features
  • Non-standard wheel groove
 
  Back to top
 
 

 EX crane components explosion-proof range

 
  • EX MOTOR RANGE FOR VT / KW
    Type • Power (kW)
    Hoisting motor MF10EB
    1.8/0.25
    MF10EC
    3.6/0.5
    MF13EB
    7.5/1.2
    MF13EC
    15/2.5
     
    Travelling motor MF07EA
    0.45/0.11
    MF07EB
    0.55/0.13
    MF07EC
    0.75/0.18
    MF07E
    1.3/0.3
    MF10EA
    1.8/0.45
  • Explosion-Proof power feeding systems, round cable type
  • Three-pole explosion-proof wall switches range
  • Wall connecting box increases safety range
  • EX-range of visual and audible warning system
 
 Download brochure Back to top
 
 
Terms of use  |  Disclaimer |  Limitation of Liability  |  Links Copyright © Jenmon 2011. All Rights Reserved